Wi-Fi Setup
When first powered on or after a reset, PaxTime creates a temporary setup network that you'll use to configure your home Wi-Fi connection.
Connection Steps
- Connect to the PaxTime setup network
On your phone or computer, open Wi-Fi settings and connect to the network named
PaxTime-XXXXXX(where XXXXXX is a unique code for your device).Image: Selecting PaxTime network in Wi-Fi settings
- Open the setup page
Open a web browser and navigate to:
192.168.4.1 - Select your home network
Choose your home Wi-Fi network from the list. PaxTime only supports2.4 GHz networks (5 GHz is not supported).
Image: Selecting home Wi-Fi network
- Enter your Wi-Fi password
Type your home network password and confirm. PaxTime will restart and connect to your home network.
Finding Your Device
After PaxTime connects to your home network:
- Check your router's connected devices list for a device named "PaxTime"
- Note the IP address assigned to PaxTime
- Open
http://<device-ip>/mpin your browser - Bookmark this page — you'll need it to access PaxTime
Local-Only Access
- The PaxTime interface is only accessible from your home network
- There is no cloud URL or remote access by default
- If your device's IP address changes, check your router again
Tip: Set a Static IP
To prevent the IP address from changing, create a DHCP reservation in your router settings. This keeps PaxTime at the same address permanently.